AVENTICS Guided Cylinder, Series GPC-BV ø10-100mm Dual-action Plain Bearing buffer Elastic with magnetic Piston Low/high ambient temperatures -10 to 70°C Compressed air High Particle size 50 µm compressed air Oil content 0... 5 mg /m³ Pressure to determine piston force 6.3 bar Technical Information At ambient and moderate temperatures, the pressure dew point must be at least 15°C and must not exceed 3°C. The oil content of compressed air must remain constant throughout its life cycle. AVENTICS approved oils are used only. You can find more information in the "Technical Information" documentation, located in the Media Entre. Note: only Ø10 models are suitable for ST4 series sensors. The ST6 and SN3 series sensors are available for all other ømodels. Material housing aluminum, positive oxidation sealed polyurethane front plate galvanized steel guide rod stainless steel bearing sintered bronze piston rod stainless steel